How to use the serial port multiplexer

This system available under the IP 172.25.20.10 offers access to the serial console of the FortiSwitch-500.

One can connect to the serial console via: ssh 172.25.20.10 -l username -p port The username must be known to the EDS32PR and the public key must be uploaded to the system. The port for the corresponding FortiSwitch-500 can be found in the table below:

Port Name of the FS-500 IP
10001 01_a: 172.25.21.1
10002 01_b: 172.25.21.2
10003 02_a: 172.25.21.3
10004 02_b: 172.25.21.4
10005 02_c: 172.25.21.5
10006 02_d: 172.25.21.6
10007 03_a: 172.25.21.7
10008 03_b: 172.25.21.8
10009 03_c: 172.25.21.9
10010 03_d: 172.25.21.10
10011 03_e: 172.25.21.11
10012 03_f: 172.25.21.12
10013 03_g: 172.25.21.13
10014 03_h: 172.25.21.14
10015 05_a: 172.25.21.15
10016 05_b: 172.25.21.16

TODO: the cables 13=>03_g and 14=>03_h are not labeld yet.

-- ChristianBick - 22 Oct 2013

DocumentationForm edit

Title How to use the serial port multiplexer
Description This page describes how to access the FortiSwitch-500 systems remotely via their virtual console
Tags FortiSwitch-500, SerialPort, RemoteAccess
Category ToDo
Topic revision: r1 - 22 Oct 2013, ChristianBick
This site is powered by FoswikiCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding Foswiki? Send feedback