Nodes

• Power factor is too low, use different PSU!
• Need electronic document with all MAC numbers (eth0,eth1,IPMI)
• Why does SM suggest IMPI to have same MAC address as eth0 while openipmi suggests differently
• USB legacy should be enabled otherwise our keybaords will not work. But this may be set after the BIOS is flashed in house.
• Jumbo frames are not possible on eth0 - possibly because IPMI is tunneled.
• DOS images seemed to hang during DHCP (sometimes)

Data server/Head nodes

• ensure "SATA" cables are not too tight.
• Is it safe to ship hard disks already installed?
• Need electronic document with all MAC numbers (eth0, eth1, eth2, eth3, IPMI, Areca)
• labels on back would be helpful, which ethernet port is IPMI, Areca
• Areca 1261/1280 issue
• SMART values of hard disks not really accessible, all disk seem always be in offline-check mode
• Impossible to fix nodes with screw

General

• Possible to print warranty sheet along with node number?
• Possible to leave out second warranty sheet which is the same for all?